Articles

116-348, 349, 358, 360, 374 Redirecter Fail RAP116-348 Various fatal errors detected in the redirecter.116-349 An error occurred when calling the Pflite function using the SIF.116-358 Fatal error related to salutation.116-360 Fatal error related to SMB.116-374 Fatal error of auto SW.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to check that the TCP/IP ports are correctly configured.2. Switch off, then switch on the...

116-343, 346, 357, 359 ESS PWB Error RAP116-343 An error was detected in the IC in the ESS PWB.116-346 A response such as system function recall error was detected.116-357 PS Fatal System Error.116-359 Fatal error in PLW.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and...

116-341, 342, 393, 394 ROM Version Incorrect RAP116-341 Versions of the multiple ROM DIMMs installed are incorrect.116-342 Fatal error related to the SNMP agent.116-393 AAA manager fatal error.116-394 Abnormal authentication mode and accounting mode settings detected during AAA manager boot sequence.ProcedureReload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip...

116-340 Not Enough Memory RAP116-340 Insufficient memory was detected during initialization. A PS option requiring an additional memory was installed but memory was not added.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Switch off, then switch on the machine, GP 10.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink...

116-334 ESS NVRAM Data Compare Fail116-334 ESS NVRAM data compare fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Enter dC125 Faults. If a 124-3XX fault code is also displayed, perform the relevant RAP.3. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure...