Articles

116-380 ESS Font ROM DIMM #1 Check Fail RAP116-380 ESS Font ROM DIMM #1 check failure.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.3....

116-378, 379, 395 MCR/MCC Soft Fail RAP116-378 Fatal error related to MCR. Due to an error in software processing, subsequent processes cannot be performed.116-369 Fatal error related to MCC. Due to an error in software processing, subsequent processes cannot be performed.116-395 Fatal error related to USB.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to check that the TCP/IP ports are correctly configured.2. Switch...

116-364, 365, 366, 368, 371, 372, 375, 377 Timer Fail RAP116-364 An error in the timer was detected.116-365 Fatal error of the SPL.116-366 Print utility operational failure, report generator operational failure.116-368 Fatal error of DumpPrint.116-371 PCL decomposer software failure.116-372 Fatal error of P-formatter.116-375 A response such as system function recall error was detected.116-377 Video DMA failure was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch...

116-355, 363, 367, 370, 373, 376 Fatal Error RAP116-355 Fatal error related to the SNMP Agent.116-363 BMLinkS/print service software failure.116-367 Overall fatal error of Parallel.116-370 Fatal error of XJCL.116-373 Fatal error related to dynamic DNS.116-376 Port 9100 software fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to check that the TCP/IP ports are correctly configured.2. Switch off, then switch on the machine, GP...

116-353, 354, 356, 361, 362 HDD Fail RAP116-353 The HDD was not booted due to a physical HDD failure detected on booting.116-354 The M/C was not started up due to a product code error detected in the HDD on booting.116-356 The M/C was not started up due to an insufficient HDD capacity error detected during HDD formatting.116-361 Fatal error of SPL HDD.116-362 SSDP Software Fail.ProcedurePerform the 016-210, 506, 777, 780, 798 HDD Error RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip...