Articles

016-403, 016-430 802.1x Certificate Failure RAP016-403 802.1x authentication certificate mismatch. The root server certificate for the authentication server is not stored in the machine or it is mismatched.016-430 The route certificate of the server certificate (for network 2) of the authenticationserver is not stored in the machine or it does not match.ProcedureAdvise the customer to:1. Store the root server certificate for the authentication server in the machine.2. If the root certificate of the server certificate cannot be obtained, disable the 802.1x setting item ‘Verify Server Certificate’ in the device.**This RAP is from Xerox Service Manual. All brand names and trademarks...

016-401 802.1x EAP Type Not Supported RAP016-401 802.1x Authentication method mismatch (the authentication server does not support the authentication method of the machine). A fail signal, which indicates that the authentication method set in the machine cannot be processed, was received from the authentication device switch that is physically connected to the machine via the network.ProcedureAdvise the customer to:1. Set the authentication method of the machine to be the same as the one set in the authentication server.2. Check the 802.1x authentication method from the UI.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective...

016-400, 402, 427, 429 802.1x Authentication Failure RAP016-400 802.1x Authentication error (incorrect user name or password). The user name or password that has been set in the machine is incorrect. The settings are different from those in the authentication device switch that is physically connected to the machine via the network.016-402 802.1x authentication time-out (there was no response signal from the authentication device). The authentication was timed-out because there was no response signal from the authentication device switch that is physically connected to the machine via the network.016-427 802.1x authentication failure (network 2).016-429 802.1x authentication failure by timing out (network...

016-383 Controller OS Communication Fail RAP016-383 Communication failure between linux and VX worksProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.3. Reload the software, GP 4.4. If the fault persists, install a new ESS PWB,...

016-371 Controller USB 1.1 Host Fail RAP016-371 A defect was detected during a diagnostic check of USB 1.1 host (no communication with the fax card could be established).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the fax PWBs, PL 20.05 are securely connected.3. Reload the software, GP 4.4. Install new components as...