Articles

016-504 POP Server Fail for Redirector RAP016-504 The POP server name could not be resolved (though the machine tried to connect to the server).ProcedurePerform the steps that follow:1. Advise the customer to specify the correct POP server name or specify the IP address.2. If the fault persists, perform the 016A Scan to Network Error Entry RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744...

016-503 SMTP Server Fail for Redirector RAP016-503 The SMTP server name could not be resolved (though the machine tried to connect to the server).ProcedurePerform the steps that follow:1. Advise the customer to specify the correct SMTP server name or specify the IP address.2. If the fault persists, perform the 016A Scan to Network Error Entry RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744...

016-502 ROM Write Error (During PJL Method) RAP016-502 An error was detected when writing data to one of the ROMs in the machine.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.2. Reload the software, GP 4.3. If the fault persists, install a new ESS...

016-500, 016-501 ROM Write Error (During DLD Method) RAP016-500 An error has occurred during the process of writing data to the cont-ROM.016-501 An error has occurred during the process of writing data to the S2X-ROM.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Reload the software, GP 4.2. If the fault persists, install a new ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service Manual....

016-461 Under Non-transmitted Image Log Stagnation RAP016-461 Creation of a new job is being restricted because image logs yet to be transferred are piled up and delayed.ProcedurePerform the steps that follow:1. Advise the customer to:a. Check the image log management server status and the network status, and clear any cause that may impede the transfer of image logs to the image log server.b. Check the transfer settings and transfer all logs that are yet to be transferred. Or, change the transfer guarantee level to ‘Low’.NOTE: Setting the transfer guarantee level to ‘Low’ may cause the image logs to get deleted...