Articles

016-518 PS Booklet Conflict WM RAP016-518 PS booklet and watermarks were specified at the same time.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. PS booklet and watermark/UUID cannot be specified at the same time. Advise the customer to cancel either one.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 and hard disk, PL 3.10 Item2 are securely connected. Ensure all surface mounted...

016-517 PS Booklet Illegal Color Mode Change RAP016-517 PS documents to be printed into a booklet have black and white and color areas.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to resubmit the job with corrected parameters. Rewrite the Post-Script file so that the page device and process color model cannot be changed in the process.2. Ensure that all connectors on the ESS...

016-516 XPS Print Ticket Description Error RAP016-516 XPS Print Ticket description error.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to check whether the application that sends a print job and the print instructions has a problem.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 and hard disk, PL 3.10 Item 2 are securely connected. Ensure all surface mounted modules...

016-515 XPS Short of Memory016-515 During XPS Bridge processing, a lack of memory was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to check the print mode. If print mode is set to High Resolution, change it to Standard. If print mode is set to Standard, change it to High Speed.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6...

016-514 XPS Error RAP016-514 During XPS Bridge processing, invalid schema, parameter error, damage to XPS file, or an error internal to XPS decomposer occurred.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.2. Reload the software, GP 4.3. If the fault persists, perform the 016A...