Articles

021-360 EP Accessory Fail RAP021-360 An error occurred in the connection to the EP accessory. The accessory that should be installed is not found.ProcedurePerform the 016-357 Controller EP Communication Fail RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747...

021-215 Invalid Accessory Type Setting RAP021-215 Invalid accessory type setting.ProcedurePerform the steps that follow:1. Enter dC131. Set NVM value 850-007 to the appropriate one for the connected accessory. Switch off, then switch on the machine, GP 10.2. Or replace the connected accessory with the appropriate one for the setting. Switch off, then switch on the machine, GP 10.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):•...

021-214 USB IC Card Reader Encryption Setting RAP021-214 Failure in the USB IC card reader encryption settings.ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Advise the customer that the encryption settings of the connected USB IC card reader are wrong. Connect an USB IC card reader that has never been used before, or one that has had its encryption settings initialized as factory default settings to the machine. Switch off, then switch on the machine, GP 10.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may...

021-213 Controller Price Table Error RAP021-213 An error in setting up EPA controller unit price table.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to save the unit price table to a file. Then set a value between 1 and 9999999 at the location(s) where a value out of the range is set. Then save the file containing the corrected unit price table.2. To...

021-210, 211, 212 USB IC Card Reader Error RAP021-210 USB IC card reader connection status error.021-211 The USB IC card reader is broken.021-212 USB IC card reader activation failure.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Check the wiring between the card reader and the machine.3. Enter dC131. Ensure NVM value 700-885 is set correctly:• Internal IC...