Articles

016-325 Using Personal Certificate RAP016-325 The IC card personal certificate is set in the certificate for signing.ProcedurePerform the steps that follow:1. Enter dC131. Set NVM value 790-389 to 0.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765...

016-324 Scheduled Image Overwrite RAP016-324 Scheduled image overwrite.ProcedureFor information only, no service action necessary. Wait until the Scheduled Image Overwrite to complete.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):•...

016-323 B-Formatter Fatal Error RAP016-323 Fatal error has occurred in the B-formatter task.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.3. Reload the software, GP 4.4. Perform the OF2 Special Boot Modes RAP.**This RAP is...

016-322 JBA Account Full RAP016-322 The cumulated accounting data reached the specified value (15,000).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Advise the customer to perform a manual retrieval of machine data from their accounting server.3. Initialise the hard disk. Refer to dC355 Image Disk Diagnostics. Advise the customer to push the user accounts to the machine...

020A Fax Entry RAPUse this RAP to isolate components which contribute to a fax communications failure.Initial Actions• Check that the fax line cables are correctly connected. Fax Line 1 from the telephone line outlet connects to the line 1 socket on the machine. Fax line 2 (if installed) from the telephone line outlet connects to the line 2 socket on the machine. Fax line 3 (if installed) from the telephone line outlet connects to the line 3 socket on the machine.• Use a handset to dial a remote number. Listen to the dial type, Dual Tone Multiple Frequency (DTMF or...