Articles

PurposeThis procedure checks and adjusts color registration:• Performs measurement to determine the condition of the registration control.• Checks that the belt controls are operating normally.• Measures/displays the amount of color shift relative to black.• Displays the results as either OK or NG (OK=Good/Pass, NG=Not Good/Fail).Procedure1. Enter Diagnostics, GP 1.2. Touch dC671 Registration Measurement Cycle.3. Touch Start, the Registration Measurement Cycle Processing message displays.4. Wait for the process to complete, then touch Close.5. OK or NG is displayed in the Result column for each row.6. Touch Close to return to the Diagnostics screen.7. Exit diagnostics, GP 1.**This procedure is from Xerox...

PurposeTo print the internal test patterns.NOTE: All test prints should be printed long edge feed.Procedure1. Enter Diagnostics, GP 1.2. Touch dC612 Print Test Pattern.3. Select the test pattern required. Refer to IQ1 Image Quality Entry RAP. Select from the available options for the required test pattern:• Pattern number• Quantity• Paper Supply• Cin%• Screen• Output destination• 1 sided or 2 Sided4. Touch the Start button.5. Touch the Close button to return to the diagnostics screen.6. Exit diagnostics, GP 1.Pattern Numbers and ImagesNOTE: If the settings for a test pattern are incorrect, an error message is displayed and the test pattern will...

PurposeTo automatically correct the scanned document size to the target document size.Procedure1. Enter Diagnostics, GP 1.2. Touch dC527 DADF Independent Operation.3. Follow the UI messages.4. Touch Start.5. Follow the UI messages, then touch Confirm.6. Touch Close to return to the Diagnostics screen.7. Exit diagnostics, GP 1.**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner...

PurposeTo set the value that is used to determine what is a blank page when performing blank fax detection.Procedure1. Enter Diagnostics, GP 1.2. Touch dC500 Blank Page Threshold Value.3. Follow the UI messages.4. Touch Start.5. A single side is then scanned and the threshold value coefficient is displayed and set.6. Touch Close to return to the Diagnostics screen.7. Exit diagnostics, GP 1.**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America...

PurposeTo backup or restore NVM values.CAUTION: Do not perform this routine if installing a new ESS PWBA.CAUTION: To avoid the loss of NVM data, perform this routine before performing dC301 NVM Backup Restore.Procedure1. Enter Diagnostics, GP 1.2. Touch dC363 Backup and Restore NVM Values.3. Touch either Back Up Files or Restore Files, then touch Start.4. Refer to the Backup / Restore NVM confirmation screen, then touch Yes to continue.5. Wait for the process to complete, then touch Close.6. Touch Close to return to the Diagnostics screen.7. Exit diagnostics, GP 1.**This procedure is from Xerox Service Manual. All brand names and...