Articles

012-903B Compiler Exit Sensor On RAPBSD-ON: BSD 13.7 Office Finisher LX TransportationInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-903 Compiler Exit Sensor On Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the paper path for jammed pieces paper.• Clean the compiler exit sensor, PL 13.35 Item 10.Procedure1. Enter dC330 code 012-150. Actuate the compiler exit sensor. The display changes. If YES, go to 9....

012-903A Compiler Exit Sensor On RAPBSD-ON: BSD 12.3 Integrated Office Finisher TransportationInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-903 Compiler Exit Sensor On Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the power supply voltage at the customer site for a drop.• Check the compiler exit sensor, PL 12.12 Item 16 is correctly installed and free from foreign objects and that the actuator is...

012-903 Compiler Exit Sensor On Entry RAP012-903 The compiler exit sensor was detected on.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-903A Compiler Exit Sensor On RAP.• Office finisher LX installed, 012-903B Compiler Exit Sensor On RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):•...

012-334B Download Fail RAPBSD-ON: BSD 3.6 PWB Communications (ESS PWB/Drive PWB to Finisher)ProcedureNOTE: Ensure the correct RAP is performed, refer to the 012-334 Download Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Check the wiring between the finisher and the IOT.2. Reload the software, GP 43. If the fault persists, install a new finisher PWB, PL 13.45 Item 2.**This RAP is from Xerox Service...

012-334A Download Fail RAPBSD-ON: BSD 3.6 PWB Communications (ESS PWB/Drive PWB to Finisher)ProcedureNOTE: Ensure the correct RAP is performed, refer to the 012-334 Download Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Check the wiring between the finisher and the IOT.2. Reload the software, GP 43. If the fault persists, install a new finisher PWB, PL 12.14 Item 1.**This RAP is from Xerox Service...