Articles

117-348 Uninitialized Used SD Card RAP117-348 An un-initialized SD card that had been used in another machine was recognized.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Initialize the NVM, perform dC301 NVM Initialization.3. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure...

117-347, 349, 350 Service Fail RAP117-347 When the SEEP extension billing counter have been used and billing count cannot be performed as new extension counter cannot be obtained.117-349 Detects this fail when enters a state where it is unable to continue operating as GRS.117-350 A problem has occurred in the AirPrint scan service software processing and it is unable to continue with the subsequent processes.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can...

117-345 SSMM Batch Setting Duration Fail RAP117-345 During the batch setting of LoDeM, a reboot occurred due to a change in system data.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. For a single occurrence, take no action.2. If the fault persists, perform the steps that follow:a. Switch off, then switch on the machine, GP 10.b. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS...

117-344 Invalid User Job Type Fail RAP117-344 The applicable user job cannot be executed at the system level.ProcedureAdvise the customer to check if public print it is set to be stored as charge print.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750•...

117-343 Log Sending Parameter Fail RAP117-343 An incorrect setting of the log transfer function was detected:1. When the image log function is disabled and the auto transfer function is enabled, transfer in job units is set.2. When the job log auto transfer function is disabled (no hard disk), the auto transfer function of the log is set to enabled.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1....