Articles

OF2 Special Boot Modes RAPUse this RAP to solve boot up errors. If directed here from another procedure, always return to that procedure.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Enter special boot mode, GP 22.2. Perform the special boot modes in the order that follows:a. LONGDIAG MODE.b. 01. JOB LOG CLEAR MODE.c. 06. HDD INITIALIZE MODE.d. 04. HDD FORMAT MODE.e. 03. NVRAM INIT MODE.**This RAP...

003-318, 003-319 IIT Software Fail RAP003-318 IIT software is corrupt.003-318 Video driver detection fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.3. Reload the...

003-311 IIT CDI I/F Mismatch RAP003-311 During controller initialization, the IIT CDI I/F has insufficient information from the IIT.ProcedureReload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered...

002-500 UI Error RAPBSD-ON: BSD 2.1 Control Panel (C7030F)BSD-ON:BSD 2.2 Control Panel (C7000)002-500 CUI scan panel UI detection error.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the UI assembly, PL 2.05 Item 7 (C7030F) or PL 2.10 Item 1 (C7000) and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure...

Parts List on PL 60.10RemovalWARNING: Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord from the customer supply while performing tasks that do not need electricity. Electricity can cause death or injury. Moving parts can cause injury.1. Open the DADF.2. Remove the right plate, PL 60.10 Item 11.3. Remove the document glass, PL 60.10 Item 9.Replacement1. The replacement is the reverse of the removal procedure.2. Before tightening the two screws, align the document glass in the direction of arrow A andthe right plate in the direction of arrow B, Figure 1. Figure 1 Alignment...