Articles

116-330, 331, 336, 337, 339 HDD File System Fail RAP116-330 HDD check at power on detected that an error has occurred or the HDD was not formatted.116-331 A log related error was detected.116-336 An error was detected when the HDD was accessed.116-337 Overall SNTP fatal error. Due to an error in software processing, subsequent Processes cannot be performed.116-339 When the JBA is started up, the HDD is not installed.ProcedurePerform the 016-210, 506, 777, 780, 798 HDD Error RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below...

116-325 ESS Fan Fail RAPBSD-ON: BSD 3.9 ESS116-325 An error occurred in the rotation of the ESS fan.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Check the wiring between P/J311 on the ESS PWB and the ESS fan for an open or short circuit, or a loose or damaged connector.3. If the fault persists, install new components...

116-324 Exception Fail RAP116-324 A fatal software exception error has occurred in the controller PWB CPU.Initial ActionsNOTE: This fault can be caused by a corrupt print job.1. Switch off the machine, GP 10.2. Disconnect the network cable.3. Switch on the machine GP 10.• If the fault persists continue with the Procedure below.• If the fault clears connect the network cable, then continue with Initial Actions from step 4.4. Use the Embedded Web Sever (EWS) to print a test page. From the EWS Home page under Quick Links select Submit File, select a file (note the on screen specified file formats),...

116-321, 322, 323, 328, 329, 338 Software Error RAP116-321 Due to an error in software processing, subsequent processes cannot be performed.116-322 Due to an error in software processing, subsequent processes cannot be performed.116-323 During a read/write check at power on, OS/DD detects an error with the ESS-NVRAM board.116-328 A failure was detected in the level 2 cache built in the CPU.116-329 A system call error related to the serial I/F was detected.116-338 Overall JBA fatal error. Due to an error in software processing, subsequent processes cannot be performed.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing...

116-320, 116-345 Process Error RAP116-320 Fatal error of the STREAMZ. A problem has occurred in the software processing and it is unable to continue with the subsequent processes.116-345 Token Ring Control IC Access error.ProcedureSwitch off, then switch on the machine, GP 10.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America...