Articles

117-311 Incorrect Installation of Security Enhancing Kit RAP117-311 The security enhancing kit is installed in the incorrect slot.ProcedureInstall the security enhancing kit in the correct slot.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner...

117-310 WSD Scan S/W Fail RAP117-310 A problem occurred in the processing of WSD scan service software, causing the processing to discontinue.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules...

116-790 Stapling Canceled RAP116-790 Either all or one of the lead stapler is canceled during print.ProcedureAdvise the customer not to cancel stapling during a job.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip...

116-771 to 116-778, 116-780 Invalid JBIG Parameter RAP116-771 An incorrect JBIG parameter DL was automatically corrected.116-772 An incorrect JBIG parameter D was detected and automatically corrected.116-773 An incorrect JBIG parameter P was detected and automatically corrected.116-774 An incorrect JBIG parameter YD was detected and automatically corrected.116-775 An incorrect JBIG parameter L0 was detected and automatically corrected.116-776 An incorrect JBIG parameter MX was detected and automatically corrected.116-777 An incorrect JBIG parameter MY was detected and automatically corrected.116-778 An incorrect JBIG parameter VLENGTH was detected and automatically corrected.116-780 The system detected an error in the document attached to the E-mail to XXXProcedureFor...

116-752 Print Job Ticket RAP116-752 The machine received a print job ticket sent together with a PDF but the job ticket data includes printing instructions that are not supported by the machine.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to:a. Re-run the job.b. Print to a machine that supports the printing instructions.2. Ensure that all connectors on the drive PWB, PL 1.10 Item...