Articles

127-337 Job Template HDD Write Error RAP127-337 An error occurred when the job template was stored on the HDD.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.3. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB,...

127-353 to 127-399 Fatal Error RAP127-353 Fatal error related to LPD.127-354 Fatal error of FTP server was detected.127-396 Fatal error related to mail IO.127-398 Fatal error related to IPP.127-399 Fatal error related to JME.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Perform the 016A Scan to Network Error Entry RAP.**This RAP is from Xerox Service Manual. All...

127-320 DFE Critical Fail RAP127-320 An error occurred in the connection to the DFE. Or the DFE needs to treat the device as SystemFail.ProcedureAdvise the customer to:1. To take the corrective actions based on the fault code displayed in the DFE monitor, then reboot the system.2. Check the device settings.3. Check the connection to the DFE.4. Check the DFE hardware.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West...

127-310 to 127-315, 342 ESS Error RAP127-310 A fatal error occurred in ESR task.127-311 Fatal error related to ExtPRTc.127-312 DFE detected a video link error.127-313 ESS detected a video link error.127-314 ESS detected a video link error.127-315 A problem has occurred with software processing, causing the processing to stop.127-342 A response such as system function recall error was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1....

125-311 PSW Controller Unexpected Fail RAP125-311 PSW controller software failure.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.3. Reload the software, GP 4.4. If...