Articles

024-956, 971, 973 Tray 7 RAP024-956 Tray 7 is empty.024-971 Tray 7 out of place.024-973 Tray 7 size mismatch.ProcedureFor information only, no service action necessary.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip...

078-250 HCF Lift Fault RAPBSD-ON: BSD 7.15 HCF Paper Stacking078-250 HCF tray lift failure. The tray 6 level sensor is not actuated within the specified time.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the condition of the paper in the HCF. Refer to GP 15 Paper and Media Size Specifications.• Check for obstructions in the paper tray.ProcedureRefer to the procedures that follow as necessary:• GP 6 How to...

024-955 Tray 6 Empty RAPBSD-ON: BSD 7.15 HCF Paper Stacking024-955 Tray 6 is empty.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Switch off, then switch on the machine, GP 10.Procedure1. Enter dC330, code 078-200, HCF no paper sensor. Manually actuate the HCF no paper sensor, PL 80.61 Item 19. The display changes. If YES, go to 3. If NO, go to 2.2. Check the HCF no paper sensor. Refer to...

024-954, 024-958 Bypass Tray Fault RAPBSD-ON: BSD 7.13 Bypass Tray Paper Sensing024-954 The bypass tray is empty.024-958 Bypass tray paper size mismatch.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Switch off, then switch on the machine, GP 10.Procedure1. Enter dC330, code 075-100, bypass tray no paper sensor. Manually actuate the bypass tray no paper sensor, PL 70.40 Item 12. The display changes. If YES, go to 3. If NO, go...

024-953 Tray 4 Empty RAPBSD-ON: BSD 7.12 Tray 4 Paper Stacking (3TM)024-953 Tray 4 is empty.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Switch off, then switch on the machine, GP 10.Procedure1. Enter dC330, code 074-101, tray 4 no paper sensor. Manually actuate the tray 4 no paper sensor, PL 80.20 Item 6. The display changes. If YES, go to 3. If NO, go to 2.2. Check the tray 4...