Articles

024-926, 963, 990 Puncher Waste Bin Not Set RAPBSD-ON: BSD 13.6 Office Finisher LX Punch024-926 The puncher waste bin is not installed correctly or there is a failure in the punch box set sensor or related circuitry.024-963 The amount of waste has become equal to or over the number that makes the punch dust box full.024-990 Punch dust full.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Empty the punch...

024-920 Face Down Tray 1 Full RAP024-920 The paper output to the face down tray 1 is full.ProcedureFor information only, no service action necessary.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For...

024-919 Face Up Tray Close RAP024-919 When output was sent to the face up tray, the face up tray was detected as closed.ProcedureFor information only, no service action necessary.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765...

024-917 Stacker Tray Staple Set Over CountBSD-ON: BSD 13.15 Office Finisher LX Stacker Tray Control024-917 The staple set count exceeded 50 sets on the stacker tray during the staple set eject operation.ProcedurePerform the 012-212 Stacker Tray Upper Limit Failure RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East...

024-916, 980, 981 Full Stack RAP024-916 One of the conditions that follow was met during mix full position detection:• When the paper size of the next job (either in feed direction or width direction) is larger than the uppermost paper size loaded for the previous job.• When changed to staple mode, the uppermost paper size loaded for the previous job is less than 279.4mm (11 inches).• When uppermost paper size loaded for the previous job is ‘unknown’024-980 Finisher stacker tray full stack.024-981 Finisher top tray paper full.ProcedurePerform the 012-211 Stacker Tray Fail Entry RAP.**This RAP is from Xerox Service Manual....