Articles

124-350 CRUM OEM Fail RAP124-350 All three CRUM OEM destinations are not set (0 or different values are set).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Enter dC132 Device ID and Billing Data. Make all three product numbers the same.3. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all...

124-349 Modal Break Point Restoration Fail RAP124-349 Modal break point fail (one mismatches the others but cannot be automatically repaired.)ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists. If YES, go to 3. If NO, go to 2.2. Perform SCP 5 Final Actions.3. Enter dC131. Compare NVM values 720-057 and 720-064. Both values are different. If YES, go to...

124-347 Billing Count Type Restoration Fail RAP124-347 Billing count type fail (one mismatches the others but cannot be automatically repaired).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists. If YES, go to 3. If NO, go to 2.2. Perform SCP 5 Final Actions.3. Enter dC131. Compare NVM values 720-052 and 720-063. Both values are different. If YES, go to...

124-346, 348, 354 Information Mismatch RAP124-346 Billing count type fail (all the three are different from each other).124-348 Modal break point fail (all the three are different from each other).124-354 Territory info fail (contents corrupted, the controller PWB was replaced).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. If the fault persists, install a new components as necessary:•...

124-345 Billing Meter Type Restoration Fail RAP124-345 Billing meter type fail (one mismatches the others but cannot be automatically repaired).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists. If YES, go to 3. If NO, go to 2.2. Perform SCP 5 Final Actions.3. Enter dC131. Compare NVM values 720-002 and 720-062. Both values are different. If YES, go to...