PL 13.27 Office Finisher LX Ejector for Xerox VersaLink C7020 C7025 C7030 C7000 Printer
Posted by Xwk Tech on
PL 13.27 Office Finisher LX Ejector (3 of 5)
Note: Item 3 contains item 4-7. Item 14 contains item 15, 16. Item 17 contains item 16, 18. Item 22 contains item 23-32. Item 34 contains item 16-35. Item 37 contains item 19, 36.
**This PL 13.27 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
| Item | Part | Description |
| 1 | 007K15451 | Gear (82T/77T/51T) |
| 2 | - | Gear (38T) (Not Spared) |
| 3 | 127K57196 | Eject motor assembly (REP 13.22) |
| 4 | - | Eject motor (MOT12-054) (P/O PL 13.27 Item 3) (REP 13.25) |
| 5 | - | Bracket (P/O PL 13.27 Item 3) |
| 6 | - | Gear/Pulley (20T/49T) (P/O PL 13.27 Item 3) |
| 7 | - | Belt (P/O PL 13.27 Item 7) |
| 8 | - | Gear (28T/22T/38T) (Not Spared) |
| 9 | - | Gear (25T) (Not Spared) |
| 10 | - | Gear/Pulley (32T/25T) (Not Spared) |
| 11 | - | Gear (23T) (Not Spared) |
| 12 | 121K34631 | Set clamp clutch (34T) (CL12-050) |
| 13 | 120E29593 | Set clamp cam actuator |
| 14 | 130K72171 | Stacker height sensor 1 assembly |
| 15 | - | Bracket (P/O PL 13.27 Item 14) |
| 16 | 930W00111 | Stack height sensor 1 (Q12-264) (REP 13.13)/Stack height sensor 2 (Q12-265) (REP 13.13)/Eject clamp home sensor (Q12-250)/Set clamp home sensor (Q12-251) |
| 17 | - | Stacker height sensor 2 assembly (P/O PL 13.27 Item 34) |
| 18 | - | Bracket (P/O PL 13.27 Item 17) |
| 19 | - | Eject cover switch (S12-300) (P/O PL 13.27 Item 37) |
| 20 | - | Harness guide (P/O PL 13.27 Item 34) |
| 21 | 120E29852 | Gear select actuator |
| 22 | 068K58732 | Eject drive bracket assembly |
| 23 | - | Bracket (P/O PL 13.27 Item 22) |
| 24 | - | Bracket (P/O PL 13.27 Item 22) |
| 25 | - | Shaft (P/O PL 13.27 Item 22) |
| 26 | - | Clamp set cam (P/O PL 13.27 Item 22) |
| 27 | 809E79070 | Spring |
| 28 | - | Bracket (P/O PL 13.27 Item 22) |
| 29 | - | Shaft (P/O PL 13.27 Item 22) |
| 30 | - | Eject clamp cam (P/O PL 13.27 Item 22) |
| 31 | - | Sleeve bearing (P/O PL 13.27 Item 22) |
| 32 | - | Sleeve bearing (P/O PL 13.27 Item 22) |
| 33 | - | Drive eject flange (Not Spared) |
| 34 | - | Eject clamp home sensor assembly (Not Spared) |
| 35 | - | Bracket (P/O PL 13.27 Item 34) |
| 36 | - | Bracket (P/O PL 13.27 Item 37) |
| 37 | 068K58742 | Eject cover switch assembly |
| 38 | 809E79820 | Spring |
| 39 | 807E22040 | Gear (30T) |
| 40 | - | Belt (Not Spared) |
**This PL 13.27 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782